Mercedes-Benz S 450
Return to the inline-six after years of the M276 V6 — and the difference is immediately noticeable. Smoother, more even rev build-up, torque plateau from 1,600–4,000 rpm without any weakness. The 48V mild-hybrid system with integrated starter-generator (ISG) is not a marketing term: 16 kW of boost on pull-away fills turbo lag completely; measurable fuel saving in sail mode. When buying, check the 48V battery — failure costs 2,000–4,000 EUR, primarily affecting build years up to 2022. Electric coolant pumps can fail from 80,000 km. Change oil every 10,000 km, do not rely on Longlife — HPFP and camshaft adjusters are sensitive to old oil. Cold-start wastegate bushing rattle is by design and not a fault. Overall a very accomplished engine that holds 250,000 km without issues when maintained correctly.
First Inline-Six in the S-Class in Decades
In 2017 the M256 debuted in the S-Class for the first time — back to an inline-six after years of V6. Composed and quiet, 1,100 rpm in seventh gear at motorway speed. The glide of the S-Class with inline-six refinement — an underrated combination. Those who don't need a V8 get S-Class quality at the cheapest V-engine price.
Engine Weaknesses 9
Frequently reported problem: 48V battery of the EQ Boost system fails and costs 2,000–4,000 EUR to replace. Design issue with earth connection in early vehicles.
Symptoms: EQ Boost deactivated, start-stop system failed, hybrid warning light, sporadic starting problems
The known Mercedes problem of leaking camshaft solenoids also affects the M256 (same solenoid technology as M276/M270). Oil migrates by capillary action and destroys lambda sensors and the ECU.
Symptoms: Lambda sensor fault codes, MIL, rough running. Multiple electrical faults simultaneously as it progresses
M256 shows elevated oil consumption from approx. 100,000 km, attributable to the PCV system and cylinder walls. Regular oil level checks necessary.
Symptoms: Dropping oil level, occasional bluish smoke after warm-up phase
The beltless M256 operates exclusively electric coolant pumps. Pump motors fail internally and trigger temperature warnings. Bleeding requires specialist diagnostic equipment.
Symptoms: Coolant temperature warning, irregular operating temperature, occasional overheating warning
The camshaft-driven high-pressure pump on the M256 can wear prematurely with irregular oil changes. Injectors can be damaged by metal debris.
Symptoms: Fuel pressure fault codes, rough idle, starting problems, hesitation under load, elevated fuel consumption
With predominantly short-trip use the OPF cannot fully regenerate. Power drop and elevated consumption result. Virtually no risk for motorway drivers.
Symptoms: Power drop at higher load, elevated fuel consumption, occasional particulate filter warning, engine runs rougher
The M256 uses Camtronic variable valve actuation — same technology as M276/M270 with documented failures. Wear on the adjustment unit or solenoid valve is possible. Oil quality is decisive.
Symptoms: Hesitation at low rpm, camshaft position sensor fault code, rough idle, engine warning with power reduction
Direct injection on the M256 inline-six causes carbon deposits on intake valves. Walnut blasting every 60,000–80,000 km recommended.
Symptoms: Hesitation in the lower rev range, rough idle, sporadic misfires on cold start
Rattling on cold start from the wastegate guide bush with design-inherent play. BorgWarner states this is necessary so the wastegate does not stick at operating temperature. Mercedes classes it as state of the art — not a defect.
Symptoms: Rattling or clattering in the first seconds after cold start, disappears after warm-up
Vehicle Weaknesses 14
The active electro-hydraulic ABC suspension requires intensive maintenance. Hydraulic lines, valve blocks and pumps can develop leaks. Hydraulic oil change required every 50,000 km.
Air bags and pressure hoses develop leaks. The compressor runs continuously and overheats. Repair: air bag pair 2,500–3,500 €, compressor 1,000–1,300 €.
Air struts on Airmatic and Magic Body Control suspensions develop leaks. Vehicle drops, suspension warning light appears. Repair per corner is very costly.
The hydraulic Magic Body Control suspension is prone to valve block and hydraulic pump failures. Contamination in the oil causes system failures.
The COMAND infotainment system freezes sporadically or fails completely. System faults increase from around 100,000 km.
Radar and camera sensors for adaptive cruise control and emergency braking can cause malfunctions due to dirt or defects. Calibration after repair is expensive.
The COMAND navigation system shows read errors, freezes or fails to boot. A defective drive unit is the most common cause.
Matrix LED headlights are not repairable -- individual modules cannot be replaced. Moisture and electronic failures require complete headlight replacement.
Window regulators fail or become unresponsive. Cause is often a software fault in the door control unit, fixable by update.
Brake discs and pads wear quickly due to the high vehicle weight. Particularly during spirited driving.
The pneumatic control unit operates soft-close, central locking and rear headrests via a shared pump. Leaks cause all functions to fail simultaneously.
The Comand NTG5 infotainment system shows display failures, freezing and navigation start errors. Temperature-dependent malfunctions occur frequently.
Seat heating mats and massage pneumatics in the multicontour seats are wear items. Heating mats fail internally, the PSE pump loses pressure for the massage function.
The rubber seal of the Keyless Go microswitch in door handles becomes brittle through UV and temperature cycling. Moisture enters, the switch corrodes.
Reports & Tests
187 owner complaints filed with NHTSA (2013–2020). Most reported: Other (43), Steering (22), Engine (20).