Dodge Durango WD
Weaknesses, engine ratings and buying advice
The Dodge Durango WD is the big three-row SUV that borrowed the muscle car heart of its Charger and Challenger relatives. Built from 2011 and still in the lineup through 2025, it's one of the last big SUVs with a rear-drive base, optional all-wheel drive, and the option of a real V8 under the hood. That puts it in a rare niche: seven seats, decent towing, and — depending on the engine — the soundtrack of a muscle car. On the used market it benefits from a long, stable production run, cheap parts, and well-understood mechanicals shared across the Stellantis fleet.
The engines follow the same pecking order as the sedan siblings. The 3.6-liter Pentastar V6 with 305 hp is the sensible base: no MDS, tough, just the familiar rocker-arm tick past 100,000 miles and the occasional leaking plastic oil filter housing. For a vehicle this size it's adequate rather than generous. The Hemi V8s bring the effortless power and the biggest worry at once. The 5.7 and the 6.4 (392) use MDS cylinder deactivation, whose hydraulic lifters are the known Achilles' heel — if one collapses, it can take the camshaft with it. Since the Durango only comes as an automatic, you can't bypass MDS with a manual, which makes service history and an ear for ticking that much more important. The 6.4 gets the forged steel crank but stays vulnerable on the MDS front. The 6.2 supercharged Hellcat turns the family SUV into the expensive but durable extreme: IHI blower bearing wear at low miles, belt and snout bushings as wear items.
On the vehicle side, the Durango has its own profile. The TIPM control module can cause electronic glitches, the ZF 8HP transmission tends to shudder, and the alternator is on the list (P60 recall). Add the racetrack taillight that lets water in (class action), a delaminating UConnect 8.4 display, brake rotors that warp early, and wearing rear shock mounts — a typical issue on a heavy SUV used for towing.
Bottom line: the Durango is an honest, practical used buy for anyone who wants space, pulling power, and optional V8 sound in one vehicle. The Pentastar V6 is the pragmatic, uncomplicated choice for family life. If you want the Hemi, check carefully for MDS-typical symptoms and the 8HP's shift quality. The Hellcat is a special case — impressive, predictably expensive, and durable, as long as the supercharger is maintained.
710 PS
Durango SRT Hellcat · Benzin
710 hp, one model year, 3,000 built
Legendary!Engine Overview
The Dodge Durango WD is available with 4 engine variants — from 295 to 710 hp.
FCA's workhorse V6, 305 hp, DOHC 24-valve — same Pentastar in half the Stellantis lineup. No MDS, no lifter lottery. Rocker arm tick around 60k miles. Plastic oil filter housing cracks — Dorman 926-959 metal replacement is the permanent fix. A small sleeper community runs ProCharger ($6,349) or RIPP ($6,799) kits pushing 400-450 whp on stock internals, bolt-on. Whether $12k all-in on a boosted V6 beats buying a used R/T is the question nobody agrees on.
- !! Left cylinder head valve-seat wear (early build) from 110,000 km
Early 3.6 Pentastar (2011–2013) suffer valve-seat/guide wear in the left head (Bank 2), notably cylinder 2. Result: lost compression and misfires. Chrysler extended warranty to 10yr/150k miles on the left head.
Symptoms: Engine ticking, misfires, rough running, check-engine light with codes P0300/P0302/P0304/P0306, loss of power. - !! Pentastar tick – worn rocker arms/rollers from 90,000 km
On 2014–2020 3.6 Pentastar the rocker-arm rollers wear, loosen and drop, shifting the rocker out of alignment, creating metal debris and risking camshaft damage. Design was revised by 2019.
Symptoms: Metallic tick, often on cold start and around 1500–2000 rpm, later constant; can progress to misfires, surging and power loss. - !! Timing chain stretch (higher mileage) from 190,000 km
At high mileage (from ~120,000 miles) the timing chains stretch and cam-to-crank correlation drifts. Extended oil intervals or low oil accelerate wear because the tensioners are oil-fed.
Symptoms: Chain rattle on cold start (first seconds), tick from the top end, check-engine light with P0016/P0017/P0018/P0019, sometimes misfires.
+ 2 more engine weaknesses + vehicle weaknesses
5.7L Hemi V8, cast iron block, pushrod two-valve — 375 hp and that unmistakable idle burble. MDS deactivates cylinders 1, 4, 6, 7 under light throttle — deactivated lifters run dry on cam lobes, metal debris destroys the camshaft. Class action: Petro v. FCA. Manual cars skip MDS entirely — no deactivation hardware, no lifter lottery. That is THE buying tip. Software delete via DiabloSport/HP Tuners: $400-650, prevents activation but lifters stay, voids warranty, costs 2-4 MPG. On 0W-40 at 5,000 mile intervals, the bottom end is solid.
- !! MDS lifter collapse and camshaft destruction from 172,000 km
The cylinder deactivation (MDS) starves individual lifters of oil at idle, and the undersized needle bearings fail. The lifter grinds into the camshaft, sending metal shavings through the engine up to total failure.
Symptoms: Ticking or tapping that rises with RPM, cylinder misfires (P0300/P0305), stumbling and power loss under acceleration, rough idle. Can progress to engine failure with little warning. - !! HEMI tick (valvetrain ticking) from 130,000 km
The famous HEMI tick from the valvetrain: early roller-bearing or lifter noise. Often harmless, but it can be the precursor to lifter/camshaft failure and should be monitored.
Symptoms: Metallic, rhythmic ticking that varies with engine speed, audible at idle and when warm. Unlike a manifold leak, it persists once the engine is hot. - !! Excessive oil consumption from 160,000 km
Many 5.7 HEMIs burn significant oil past 100,000 miles, sometimes over 1 quart per 1,000 miles. Causes include piston-ring and valve-stem-seal wear plus a clogged PCV/CCV breather.
Symptoms: Dropping oil level without visible leaks, low-oil warning, bluish smoke under acceleration, oil-fouled spark plugs.
+ 3 more engine weaknesses + vehicle weaknesses
392 cubic inches, 4.09-inch bore, 485 hp — the biggest factory NA V8 of the 2020s. Forged steel crankshaft where the 5.7 uses cast iron — the real upgrade. Powder metal rods, cracked-cap design. Pistons are hypereutectic, not forged — ring lands too thin for boost, supercharger kits crack them. Same MDS lifter failure on automatics — engine replacement $15,000. Manual 392s skip MDS. VVT and active intake give 45 lb-ft more than the old 6.1 SRT. On 0W-40 at 5k intervals, the rotating assembly outlasts the car.
- !! MDS roller lifter / camshaft failure (cylinder deactivation) from 95,000 km
MDS cylinder deactivation restricts oil flow to the roller lifters. The needle bearings seize, the roller drags across the hardened cam lobe, destroys it and circulates metal debris through the oil. Frequently ends in total engine loss.
Symptoms: Rhythmic metallic tick (louder when warm/hot restart), cylinder misfire (P0300/P0302), power loss at low rpm, metal filings on the oil filter screen or VCT solenoid. - !! Piston / ringland failure under forced induction (modified only) from 30,000 km
The stock cast pistons are considered a 'time bomb' under boost. Above roughly 6 psi or when running lean, ringlands/pistons crack. Stock cars are unaffected — only aftermarket supercharged 392 builds.
Symptoms: Knock/ping under full load, sudden power loss, cylinder misfire, smoke, compression loss after high boost or a lean condition. - !! High oil consumption (track and break-in use) from 13,000 km
The 6.4 uses a lot of oil during break-in and track use — sometimes over a quart per 1,200 miles. Repeated high-rpm downshifting worsens it. Checking the oil level before track days is important.
Symptoms: Dropping oil level between changes, blue smoke on load changes, low-oil warning, oil-fouled spark plugs. If ignored, oil starvation can cause bearing damage.
+ 3 more engine weaknesses + vehicle weaknesses
6.2L supercharged V8, IHI twin-screw — 2.4L on standard Hellcat (11.6 PSI, 707-717 hp), 2.7L on Redeye (14.5 PSI, 797 hp, Demon-derived, forged rods + pistons). Black key fob = 500 hp via drive-by-wire throttle mapping. Red fob = everything. SRT Power Chiller diverts A/C refrigerant to cool intake. 2015-2016: snout bolt backs out, destroys bearings — $10-12k. Intercooler bricks leak coolant into cylinders. Heat soak costs 30-50 hp after repeated pulls — physics, not a defect.
- !! Supercharger bearing failure (IHI blower) at low mileage from 5,000 km
Early build years suffered defective IHI supercharger bearings (mainly the rear bearing). Failures occurred as early as 500–2,000 miles. FCA sued the bearing supplier and replaces blowers under warranty on unmodified engines.
Symptoms: Loud whine and ticking at idle, grinding noise from the supercharger, in extreme cases rotors contacting the housing. - !! Recall: engine oil cooler hose separation (oil loss and fire risk)
NHTSA recall 17V-496 (Chrysler T48): the joint between the rubber oil cooler hose and aluminum tube can separate, causing rapid oil loss — oil may spray onto hot surfaces or the windshield, risking fire and engine seizure.
Symptoms: Sudden oil loss, oil on the windshield or in the engine bay, dropping oil pressure, smoke/burning smell. - !! Supercharger belt slip and breakage (limp mode) from 26,000 km
Factory belt tension is marginal under high load; the supercharger belt slips (squeal, rubber dust) or snaps. One documented failure occurred at ~16,000 miles, triggering limp mode with code P012B.
Symptoms: Squeal during shifts, black rubber dust under the blower pulley, sudden power loss, limp mode near 1,100 rpm, check engine light.
+ 3 more engine weaknesses + vehicle weaknesses
Vehicle Weaknesses
| Weakness | Cost | |
|---|---|---|
| TIPM Power Module Failure Totally Integrated Power Module fails without warning. No-start, fuel pump relay sticks, all warning lights. Primarily 2011-2013. Symptoms: Vehicle won't start, all warning lights on, wipers/horn activate randomly from 56,000 km | Medium | |
| Alternator Failure (Recall P60) Alternator may suddenly fail. Recall P60 covers 2011-2014 models. Symptoms: Battery light, vehicle stalls, electrical systems fail progressively from 130,000 km | Medium |
Alternatives
Mazda CX-90 TY
Full-Size SUV (2023–2025)
Toyota Sequoia XK80
Full-Size SUV (2023–2025)
Volvo EX90 I
Full-Size SUV (2023–2026)
Acura MDX YD4
Full-Size SUV (2022–2025)
BMW XM G09
Full-Size SUV (2022–2026)
Land Rover Range Rover Sport L461
Full-Size SUV (2022–2026)
Explore more
Known Problems and Issues +
A total of 30 weaknesses have been documented for the Dodge Durango WD (2011–2025) — 23 engine-related and 7 vehicle-related. Typical issues affect Electronics, Gearbox, Body, Interior.
Durango (Pentastar-3.6-LC, 2011–2025) — Be Careful: Left cylinder head valve-seat wear (early build), Pentastar tick – worn rocker arms/rollers, Timing chain stretch (higher mileage). Power: 295 PS.
Durango (Hemi-5.7-LC, 2011–2025) — Be Careful: MDS lifter collapse and camshaft destruction, HEMI tick (valvetrain ticking), Excessive oil consumption. Power: 360 PS.
Durango (Hemi-6.4-LC, 2018–2025) — Be Careful: MDS roller lifter / camshaft failure (cylinder deactivation), Piston / ringland failure under forced induction (modified only), High oil consumption (track and break-in use). Power: 475 PS.
What to watch out for with the Dodge Durango? See the detailed listing of all engine and vehicle weaknesses in the sections above.
Frequently Asked Questions
What problems and weaknesses does the Dodge Durango WD have? +
What should I look for when buying a used Dodge Durango WD? +
Which engine is recommended? +
Which Dodge Durango WD engine is the most fun? +
Is the Dodge Durango WD worth buying used? +
What horsepower variants are available for the Dodge Durango WD? +
Last updated: February 2026 · All information without guarantee